Monday, December 30, 2019

Demon: More Necklace, More Armor.

I got his armor glued in place today, and got some of the shading on the metals done. There's more shading to do.



I think it would have been better if I'd chosen a less blue steel color; it kinda blends in. However, it's also quite flat compared to the rest of him, which might also be messing with how it looks. I'm going to do more shading and highlighting and get the contrast up and then see what I think.

Saturday, December 28, 2019

Demon: Necklace, Armor

Got back to painting today, and got back to the demon. He's mostly done and I'd like to get him finished up.

I did silver bits on his armor today and also got the shoulder armor started. My plan is to shade the necklace links that will be under the shoulder armor so I can glue it in place and do the shading and highlighting of that piece on the figure.





I knocked him over today (a couple times) and also got silver paint on his nose. Sigh.

Saturday, December 21, 2019

Dagon: Half the Tail Done!

This is all the front half of Dagon's tail.


I was originally planning to do all the fins, then come back to the middle bits, but I might be getting low on the purple I'm using. So I wanted to get the front done, so that in case I run out and have to try to mix a match (and don't quite manage it), the different shadow color will be on the back, and less likely to be viewed.

Friday, December 20, 2019

Dagon: More Tail

I did the gap filling yesterday, so today I was able to get back to paint. Started detailing on the fins.


Wednesday, December 18, 2019

Dagon: Tail

Here's Dagon's tail with the colors roughed in. I've glued it to the body.



I initially tried roughing in the colors with the airbrush, but it was not cooperating. There seems to be a clog in the nozzle that's keeping it from working properly. I'm going to have to take it apart and see if I can fix it.

There's some pretty sizeable gaps where the tail meets the body that I'm going to fill. Then it's just finishing up the tail pieces with blending, detail work, and highlights.

Saturday, December 7, 2019

Dagon: Body

Here's shading and highlighting on Dagon's body. Next will be his face, and then the tail.



Sunday, December 1, 2019

Dagon: More Limbs

Continued shading and highlighting along Dagon's legs. All the appendages are done now. I'd hoped to get the shading on his body done as well, but no such luck.


I'm not thrilled with how he's looking, but I'm hopeful that once I get in to the body (and the face) it'll improve. He's in Ugly Stage right now, for sure.

Saturday, November 30, 2019

Dagon: Shading and Highlighting

Continued on Dagon, adding shading and highlighting on all the pink bits and starting on his legs.




Friday, November 29, 2019

Dagon: Base coating. Demon: Jewelry

I started with base coating Dagon himself today. I used my airbrush to put down the base color, then also tried to use it to put in the blue shading and the pink details. I was really happy with the base coat. Much less so with the rest. I'm just not good enough with the airbrush to do that kind of work.




I went back and cleaned up a bunch of it with the brush. Then I decided I was having a lot of trouble placing shadows without him being on the base. So, I filled in the shadow color on the parts of the underside that I had missed with the airbrush, and glued him in place. I think there's plenty of room to work underneath him if I need to...hopefully I won't make too much of a mess in the process.

Next time will be more shading on him.

I did a little work on Big Blue as well. I did an undercoat and then the gold for his necklace. I'm not sure if I like it or not. I'm tempted to do the 'fang' looking parts in silver instead of bone, which was my original idea.




Monday, November 25, 2019

Demon: Back Highlights

Continued on the demon today. I did the highlights and glazing on his back. It's pretty much done; there are a couple spots I might try to smooth further. I'm not going to put as much effort into this view, though. It's clearly not the money shot.


Sunday, November 24, 2019

Dagon: Base Done. Demon: Shading back.

I did manage to finish off Dagon's base today.





I'm pretty happy with the result, except I probably could have highlighted the tube coral more.

If I had time after I finished the base, my plan was to start on Dagon's main body with the airbrush. I did have time, but really didn't feel like getting in to the airbrush. Instead, I worked on shading the back of the demon. It's the last skin-area I have for him.


I don't like working with the airbrush in the evenings because I have much more limited time (and I'm usually more tired). So probably what I will do this week is work on finishing him. Another possibility is maybe working on one of the Amazons...but he's awfully close to the 'power through until he's done' point.

Saturday, November 23, 2019

Dagon: Base & Detail

Continued working on Dagon's base. I got the rest of the sand base coated and detailed, and moved on to the corals. The branched coral is done, as are the brains. The others all need some more work.

Lesson learned today: Do not use your good brushes to paint scenery/basing. It doesn't need them, and will ruin them. :(





Id been hoping to be done with this today, but no such luck. I should be able to get it wrapped up tomorrow, though.

Thursday, November 21, 2019

Dagon: Base coating the base.

I didn't have a lot of time tonight, but I was able to start base coating Dagon's base. I got some primer on the coral and base coated the statues. I've decided in my head that they are made of basalt, so...black. This may be a mistake. Black is tricky under the best conditions. This is a lot of black.


Next I'll probably do the sand, then the coral, then come back and touch up and detail the statues last. I primed the coral after put on the black, and that taught me that in the process of painting the coral I'm going to get paint on the statues.

Wednesday, November 20, 2019

Dagon: More base. Demon: More horns.

I got a package in the mail today with some little coral bits and shells my wonderful friend Michael Proctor of Clever Crow Studio sent me.


I added a few more bits from there to Dagon's base. Just a handful, as some stuff I couldn't fit in in a way I liked, and some of it I want to try making molds from and casting copies.

Here's the updated base:



After that, I got a little time in on Dagon. I tried putting the dark purple on just the tip of his other horn. I don't have a preference right now for more vs. less dark on the horn, so I'm going to work on the necklace and see if that helps me decide, once more different colors are in place.



Monday, November 18, 2019

Demon: Horns

Tonight I tried to figure out what I wanted to do with the demon's horns. I tried going with a dark brown on the ends, but I did not like that at all. So I went back to purple. I was just roughing in colors here; even if I stick with these colors I will need to clean up the gradient and do the shading/highlighting and detailing.



I'm still debating the single tone vs. multi-tone horns, but I am pretty sure I prefer the two-tone horns. I like having the light color by his face to draw attention to his face, but I think having the dark color on the ends keeps the focus near the face. 


Saturday, November 16, 2019

Demon: Face. Dagon: Base

Continued on the demon today. I finished the highlights on his face and some of the details.



Might be too much highlights. Might also need to bring more purple glaze on to the face. But it's nice to have his eyes in. He looks more like a person with character now. I'm tempted to do his horns before finishing off the last of his skin...but I'm already having trouble with consistency between the skin areas, so that's probably not a great idea.

I also worked on the base for Dagon. I've added the coral.





Friday, November 15, 2019

Demon: More highlights

Started the second round of highlight on the demon's face and neck. I'm going to finish the highlights on the face, then go back and do the glazing across the whole area.


Wednesday, November 13, 2019

Dagon: Color Tests

Today I did some color tests for Dagon, to try to get a color pallete I like. I found a random fish guy figure and started slapping paint on. There's no detail work and pretty much no blending. I like this guy though, so I may come back and finish him later.


This was my first try. I started with pink on his fins and a yellow green for the highlight. Then I tried a dark teal for the fins, and that was not better. While I like the yellow-green, it doesn't suit the look I want for this particular project.


This was my other try. I still don't love the pink, but I think he needs that additional hue and I haven't had any ideas what might be better. But I do like the the blue shadows, and I like the pale green highlights better than the yellow/green. It's more in line with my mental image. I'm going to play with the fin color a little more, but I think the rest I'm going to keep as-is.